Opening rear quarter window - removal and refitting
Removal
1 Remove the rear pillar interior trim panel.
2 Remove the two screws securing the window catch to the body (see illustration).
26.2 Opening the rear quarter window catch
A Cap
B Retainer
C Grommet
D Spacer
E Catch
F Screw (one of two)
3 Prise the two screw covers from the hinges.
Support the glass, and remove the two hinge screws, then lift out the glass (see illustration).
26.3 Opening the rear quarter window hinge
A Cap
B Screw
C Hinge
D Spacer
E Grommet
F Retainer
G Cap
H Screw
4 If a new window is to be fitted, transfer the catch to it.
Refitting
5 Refitting is a reversal of removal.
See also:
Horn - removal and refitting
Removal
1 The horn(s) are located in the left-hand front
corner of the engine compartment. Before
removing, disconnect the battery.
2 Disconnect the lead from the horn.
3 Unscrew the single bolt ...
General information and precautions
Contact breaker ignition system
The ignition system is divided into two
circuits, low tension (primary) and high tension
(secondary). The low tension circuit consists of
the battery, ignition swit ...
Engine valve clearance check (Every 12 000 miles (20 000 km) or 12 months)
SOHC engines
1 The valve clearances must be checked with
the engine cold. On carburettor models
remove the air cleaner.
2 Disconnect the HT leads from the spark
plugs and release them from the cl ...
