See also:

Cab interior trim panels (P100 models) - removal and refitting
Side trim panel 1 Remove the rear pillar trim panel. 2 Remove the side trim panel by prising out the four expander pins from the clips, then pulling out the clips and withdrawing the panel. 3 Re ...

Ignition HT coil - testing, removal and refitting
Note: Refer to the precautions given in Section 1 before proceeding. All except models with DIS ignition system Testing 1 Accurate checking of the coil output requires the use of special test eq ...

Accelerator pedal - removal and refitting
The procedure is the same as described in Part A of this Chapter for carburettor models. ...