Fuses and relays
Fuses
If electrical components in the vehicle are not working, a fuse may have blown. Blown fuses are identified by a broken wire within the fuse. Check the appropriate fuses before replacing any electrical components.
Note: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire.
Standard fuse amperage rating and color
Passenger compartment fuse panel
The fuses are coded as follows:
Power distribution box
The power distribution box is located in the engine compartment. The power distribution box contains high-current fuses that protect your vehicle's main electrical systems from overloads.
Always disconnect the battery before servicing high current fuses.
Always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs
If the battery has been disconnected and reconnected, refer to the Battery section of the Maintenance and specifications chapter.
The high-current fuses are coded as follows.
Relays
Relays are located in the power distribution box and should be replaced by qualified technicians.
See also:
Thermo-viscous cooling fan (SOHC models) - removal and refitting
Removal
1 Disconnect the battery negative lead.
2 Remove the four retaining clips and
unscrew the two retaining screws, then
withdraw the upper section of the fan shroud
(see illustrations).
1 ...
Fuel filter renewal - fuel injection engines (Every 24 000
miles or 2 Years)
Warning: This procedure may
result in some fuel spillage. Before
carrying out any operation on the
fuel system refer to the
precautions given in Safety First! at the
beginning of this manual and ...
Exterior mirror - removal and refitting
Without remote control
Removal
1 Using a screwdriver, prise off the triangular
trim panel from inside the mirror mounting
position.
2 Unscrew the three screws and withdraw the
mirror.
Refitting ...