Distributor lubrication - models with contact breaker distributor (Every 6000 miles or 6 months)
1 Remove the distributor cap and the rotor arm.
2 Apply a couple of drops of light oil to the felt pad in the top of the shaft.
3 Wipe clean the distributor cam, then apply a trace of high melting-point grease to the four cam lobes.
4 Refit the rotor arm and the distributor cap.
See also:
Piston/connecting rod assemblies - removal and refitting
Note: A piston ring compressor tool will be
required for this operation.
Removal
1 Remove the cylinder head and the sump as
described in Sections 4 and 5 respectively. Do
not remove the oil pick- ...
Radiator - removal, inspection and refitting
All models except RS Turbo
Pre-1986 models
Removal
1 Drain the cooling system as described in
Chapter 1.
2 Disconnect the battery negative terminal.
3 Release the retaining clips and disconnect
...
Radiator grille panel - removal and refitting
Models up to 1987
1 With the bonnet raised, remove the four
grille panel securing screws from the top of
the front panel.
2 Lift the grille panel from its lower mounting
bushes, and withdraw it f ...