Seat belt check (Every 6000 miles or 6 months)
1 Periodically check the belts for fraying or other damage. If evident, renew the belt.
2 If the belts become dirty, wipe them with a damp cloth using a little detergent only.
3 Check the tightness of the anchor bolts and if they are ever disconnected, make quite sure that the original sequence of fitting of washers, bushes and anchor plates is retained.
See also:
Centre console - removal and refitting
Models up to 1990
Full length console
1 Where applicable, prise the electric window
switches from the front upper console panel
and disconnect the wiring.
2 Remove the three securing screws from ...
Valve block (ABS) - removal and refitting
Caution: Refer to the
precautions in Section 1.
Removal
1 Disconnect the battery negative lead.
2 Depressurise the hydraulic system by
pumping the brake pedal at least 20 times, or
until it beco ...
Specifications
Front suspension
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . Independent by MacPherson struts with coil springs
and
integral tele ...
