Major operations requiring engine removal
The following work can only be carried out after removal of the engine from the car: a) Crankshaft main bearings - renewal.
b) Crankshaft - removal and refitting.
c) Flywheel - removal and refitting.
d) Crankshaft rear oil seal - renewal.
e) Oil pump - removal and refitting.
See also:
Distributor - removal and refitting
Contact breaker ignition system
OHV engines
Removal
1 Disconnect the leads from the spark plugs,
spring back the retaining clips and lift off the
distributor cap.
2 Disconnect the LT lead at the ...
Idle Speed Control Valve (ISCV) - removal, cleaning and
refitting
Removal
1 Disconnect the battery negative lead.
2 Disconnect the valve wiring plug (see
illustration).
12.2 Idle speed control valve - 1.6 EFI engine
A Wiring plug B Securing bolts
3 Unscrew t ...
Battery - testing and charging
Note: Refer to the precautions at the end of
Section 1 before proceeding.
Standard and low maintenance
battery - testing
1 If the car covers a small annual mileage it is
worthwhile checking the s ...
