Fastening the seat belts

WARNING:
Insert the tongue into the buckle until you hear a distinct click. You have not fastened the seat belt properly if you do not hear a click.


Pull the belt out steadily. It may lock if you


Pull the belt out steadily. It may lock if you pull it sharply or if the vehicle is on a slope.

Press the red button on the buckle to release the belt. Let it retract completely and smoothly.

    See also:

    Manual transmission operation (if equipped)
    Using the clutch Manual transmission vehicles have a starter interlock that prevents cranking the engine unless the clutch pedal is fully pressed. To start the vehicle: 1. Make sure the parkin ...

    Rear parcel shelf - removal and refitting
    Removal 1 Open the tailgate fully and disengage the parcel shelf lifting strap loops from the tailgate retaining knobs. 2 Lift out the parcel shelf pivot pins from their notches in the support br ...

    Attaching child safety seats with LATCH (Lower Anchors andTethers for CHildren) attachments
    The LATCH system is composed of three vehicle anchor points: two (2) lower anchors located where the vehicle seat back and seat cushion meet (called the “seat bight”) and one (1) top tether anchor l ...