Direction indicator/hazard warning flasher relay - renewal

1 Disconnect the battery negative lead.

2 The relay is located on a bracket above the steering column. Access is gained either by removing the driver’s side lower facia panel or the instrument panel.

3 Unclip the relay from the bracket, and disconnect the wiring plug (see illustration).

6.3 Direction indicator/hazard warning flasher relay location (arrowed)
6.3 Direction indicator/hazard warning flasher relay location (arrowed)

4 Refitting is a reversal of removal. Check for correct operation before refitting the facia panel or instrument panel.

    See also:

    Toll reader
    Toll reader On vehicles with an anti-heat windscreen, toll readers should be placed in the area as shown (all measurements shown in millimetres), otherwise communication performance with toll s ...

    Loudspeakers - removal and refitting
    1 Disconnect the battery earth lead. Facia panel-mounted speakers Upper 2 Prise the speaker grille from its four retaining clips in the facia using a thin-bladed screwdriver. 3 Remove the four s ...

    Principle of operation
    Cruise control allows you to control your speed using the switches on the steering wheel. You can use cruise control when you exceed approximately 30 km/h (20 mph). ...