Courtesy lamp switch - renewal

1 Disconnect the battery negative lead.

2 Open the door and remove the switch securing screw.

3 Withdraw the switch from the door pillar and pull the wiring out sufficiently to prevent it from springing back into the pillar (see illustration).

12.3 Withdrawing a courtesy lamp switch
12.3 Withdrawing a courtesy lamp switch

4 Disconnect the wiring and remove the switch.

5 Refitting is a reversal of removal.

    See also:

    Using winter tyres
    CAUTION: Make sure that you use the correct wheel nuts for the type of wheel the winter tyres are fitted to. If winter tyres are used, make sure that the tyre pressures are correct. See Technica ...

    Panel dimmer control
    Use to adjust the brightness of the instrument panel and all applicable switches in the vehicle during headlamp and parking lamp operation. • Move the control to the full upright position, pas ...

    Reporting Safety Defects (U.S. only)
    If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in ...