Clock - removal and refitting

1 Disconnect the battery negative lead.

Standard clock
2 Using a thin-bladed screwdriver, carefully prise the clock from the facia panel.

3 Disconnect the wiring plug and withdraw the clock.

4 Refitting is a reversal of removal.

Multi-function digital/analogue clock
5 Remove the single screw from the top edge of the facia panel in which the clock is housed, then withdraw the facia panel.

6 Remove the four now exposed securing screws, disconnect the wiring plug, and withdraw the clock (see illustration).

19.6 Multi-function digital/analogue clock securing screws (arrowed)
19.6 Multi-function digital/analogue clock securing screws (arrowed)

7 Refitting is a reversal of removal.

    See also:

    Tyre care
    Tyre care To make sure the front and rear tyres of your vehicle wear evenly and last longer, we recommend that you swap the tyres from front to rear and vice versa at regular intervals of betwe ...

    Using stability control
    A message will be shown in the display. See Information messages. The system will be switched on automatically every time you switch the ignition on. ...

    Arming the engine immobiliser
    The engine immobiliser is armed automatically a short time after you have switched the ignition off. ...