Courtesy lamp and luggage compartment lamp - renewal

1 Disconnect the battery negative lead.

2 To remove a lamp, simply prise it from its location, using a thin-bladed screwdriver, and disconnect the wiring (see illustrations).

25.2a Removing a courtesy lamp
25.2a Removing a courtesy lamp

25.2b Removing a luggage compartment lamp
25.2b Removing a luggage compartment lamp

When working on an overhead consolemounted courtesy lamp, disconnect the wiring between the map reading lamps and the courtesy lamp before removing the courtesy lamp.

3 Refitting is a reversal of removal.

    See also:

    Vehicle loading – with and without a trailer
    This section will guide you in the proper loading of your vehicle and/or trailer, to keep your loaded vehicle weight within its design rating capability, with or without a trailer. Properly loading ...

    Engine Coolant Temperature (ECT) sensor - removal and refitting
    Removal 1 The ECT sensor is screwed into the inlet manifold. 2 Disconnect the battery negative lead. 3 Partially drain the cooling system as described in Chapter 1. 4 Disconnect the sensor wirin ...

    Manual climate control
    Air distribution control Windscreen A Footwell and windscreen B Footwell C Face level and footwell D Face level E Face level and windscreen F You can set the air distribution control to any ...