Radio/cassette player power amplifier - removal and refitting

Removal
1 Some “high specification” models are fitted with an audio power amplifier, which is mounted as a separate unit beneath the radio/ cassette unit. To remove the unit proceed as follows.

2 Disconnect the battery negative lead.

3 Remove the two screws under the top edge of the power amplifier unit.

4 Slide the unit forwards from the facia panel, until the wiring plugs can be disconnected.

Disconnect the wiring plugs and remove the unit.

Refitting
5 Refitting is a reversal of removal.

    See also:

    Storage compartments
    WARNING: Do not drive with any storage compartment lid open. Make sure that you secure the lid before setting off. CAUTION: Do not keep heat-sensitive items and liquids in any storage compartme ...

    Using the parking aid - Vehicles With: Front and Rear Parking Aid
    WARNING: The parking aid does not relieve you of your responsibility to drive with due care and attention. Switching the parking aid on and off The parking aid is per default off. To switch the ...

    Crankshaft and bearings - examination and renovation
    1 Examine the bearing surfaces of the crankshaft for scratches or scoring and, using a micrometer, check each journal and crankpin for ovality. Where this is found to be in excess of 0.0254 mm (0. ...