Sitting in the correct position
Sitting in the correct position
WARNINGS:
Do not adjust the seats when the
vehicle is moving.
Only when you use the seat belt properly, can it hold you in a position that allows the airbag to achieve its optimum effect.
When you use them properly, the seat, head restraint, seat belt and airbags will provide optimum protection in the event of a collision. We recommend that you: • sit in an upright position with the base of your spine as far back as possible.
• do not recline the seatback more than 30 degrees.
• adjust the head restraint so that the top of it is level with the top of your head and as far forwards as possible, remaining comfortable.
• keep sufficient distance between yourself and the steering wheel. We recommend a minimum of 250 millimetres (10 inches) between your breastbone and the airbag cover.
• hold the steering wheel with your arms slightly bent.
• bend your legs slightly so that you can press the pedals fully.
• position the shoulder strap of the seat belt over the centre of your shoulder and position the lap strap tightly across your hips.
Make sure that your driving position is comfortable and that you can maintain full control of your vehicle.
See also:
Diagram 3a. Ancillary circuits - wash/wipe, central locking and
electric windows. Models from 1990 onwards
Diagram 3a. Ancillary circuits - wash/wipe, central locking and electric
windows. Models from 1990 onwards ...
Bluetooth setup
Before you can use your telephone with
your vehicle it must be bonded to the
vehicle telephone system.
Handling of phones
Up to six Bluetooth devices can be
bonded to the vehicle system.
Note: I ...
Engine compartment overview - 1.8L Duratorq-TDCi (Lynx) Diesel
A. Screen washer fluid reservoir*: See Washer fluid check.
B. Engine coolant reservoir*: See Engine coolant check.
C. Brake and clutch fluid reservoir (right-hand drive)*: See Brake and clutch
f ...
