Introduction

General information
This Chapter is designed to help the home mechanic maintain his/her vehicle for safety, economy, long life and peak performance.

The Chapter contains a master maintenance schedule, followed by Sections dealing specifically with each task in the schedule. Visual checks, adjustments, component renewal and other helpful items are included. Refer to the accompanying illustrations of the engine compartment and the underside of the vehicle for the locations of the various components.

Servicing your vehicle in accordance with the mileage/time maintenance schedule and the following Sections will provide a planned maintenance programme, which should result in a long and reliable service life. This is a comprehensive plan, so maintaining some items but not others at the specified service intervals, will not produce the same results.

As you service your vehicle, you will discover that many of the procedures can - and should - be grouped together, because of the particular procedure being performed, or because of the close proximity of two otherwise-unrelated components to one another. For example, if the vehicle is raised for any reason, the exhaust can be inspected at the same time as the suspension and steering components.

The first step in this maintenance programme is to prepare yourself before the actual work begins. Read through all the Sections relevant to the work to be carried out, then make a list and gather together all the parts and tools required. If a problem is encountered, seek advice from a parts specialist, or a dealer service department.

Intensive maintenance
If, from the time the vehicle is new, the routine maintenance schedule is followed closely, and frequent checks are made of fluid levels and high-wear items, as suggested throughout this manual, the engine will be kept in relatively good running condition, and the need for additional work will be minimised.

It is possible that there will be times when the engine is running poorly due to the lack of regular maintenance. This is even more likely if a used vehicle, which has not received regular and frequent maintenance checks, is purchased. In such cases, additional work may need to be carried out, outside of the regular maintenance intervals.

If engine wear is suspected, a compression test will provide valuable information regarding the overall performance of the main internal components. Such a test can be used as a basis to decide on the extent of the work to be carried out. If, for example, a compression test indicates serious internal engine wear, conventional maintenance as described in this Chapter will not greatly improve the performance of the engine, and may prove a waste of time and money, unless extensive overhaul work is carried out first.

The following series of operations are those most often required to improve the performance of a generally poor-running engine:
Primary operations
a) Clean, inspect and test the battery b) Check all the engine-related fluids c) Check the condition and tension of the auxiliary drivebelt
d) Renew the spark plugs e) Inspect the distributor cap and HT leads - as applicable
f) Check the condition of the air cleaner filter element, and renew if necessary g) Renew the fuel filter h) Check the condition of all hoses, and check for fluid leaks
i) Check the idle speed and mixture settings - as applicable
If the above operations do not prove fully effective, carry out the following secondary operations:
Secondary operations
a) Check the charging system b) Check the ignition system c) Check the fuel system d) Renew the distributor cap and rotor arm - as applicable
f) Renew the ignition HT leads - as applicable

    See also:

    Interior
    Ford says it augmented the Fusion's sound-deadening areas — including the windshield and side windows — to render a quieter cabin than the Accord's or Camry's. New materials cover the ...

    Distributor - removal and refitting
    Contact breaker ignition system OHV engines Removal 1 Disconnect the leads from the spark plugs, spring back the retaining clips and lift off the distributor cap. 2 Disconnect the LT lead at the ...

    Front suspension crossmember - removal and refitting
    Removal 1 Remove the steering gear. 2 Support the engine with a jack and interposed block of wood under the sump. 3 Unscrew and remove the engine mounting nuts from the top of the mountings in th ...