Major operations possible with the engine in the vehicle

The following operations can be carried out without removing the engine from the vehicle: a) Removal and servicing of the cylinder head
b) Removal of the camshaft after removal of the cylinder head
c) Removal of the timing belt and sprockets d) Removal of the sump
e) Removal of the oil pump f) Removal of the pistons and connecting rods
g) Removal of the big-end bearings h) Removal of the engine mountings i) Removal of the clutch and flywheel j) Removal of crankshaft front and rear oil seals
k) Removal of the auxiliary shaft

    See also:

    Symbols glossary
    Symbols in this handbook WARNING: You risk death or serious injury to yourself and others if you do not follow the instructions highlighted by the warning symbol. CAUTION: You risk damaging you ...

    Door lock - removal and refitting
    Models up to 1990 1 Remove the door inner trim panel. 2 Where necessary for improved access, peel back the waterproof plastic sheet from the door. 3 Withdraw the window channel extension through ...

    Brake and clutch fluid check
    WARNING: Do not allow brake fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor. The brake and clutch systems are ...