Engine - refitting (manual gearbox in vehicle)

1 Reverse the procedure described in Section 9, noting the following points: 2 Before attempting to refit the engine, check that the clutch friction disc is centralised. This is necessary to ensure that the gearbox input shaft splines will pass through the splines in the centre of the friction disc.

3 Check that the clutch release arm and bearing are correctly fitted and lightly grease the input shaft splines.

4 Check that the engine adapter plate is correctly positioned on its locating dowels.

5 Refit the exhaust downpipe.

6 Reconnect the clutch cable to the release arm, ensuring that it is routed as noted during removal.

7 Fill the engine with the correct grade and quantity of oil.

8 Fill the cooling system.

9 Check and if necessary adjust the tension of the alternator and where applicable the power steering pump drivebelt(s).

10 Adjust the throttle cable.

    See also:

    Diagram 4. 1.6 and 1.8 CVH engine CfI fuel injection and ignition systems. Models from 1990 onwards
    Diagram 4. 1.6 and 1.8 CVH engine CfI fuel injection and ignition systems. Models from 1990 onwards ...

    Focus Wagon
    At 178.4 inches long overall, the Focus Wagon is nearly a foot longer than Focus hatchbacks. Wagon models have 73.7 cubic feet of cargo capacity when the seats are folded down and 35.6 cubic feet ...

    Satellite navigation unit holder
    Fitting the navigation unit Insert the navigation unit into the holder until you hear a distinct click. Adjusting the holder 1. Unlock. 2. Adjust the holder to the desired position. 3. Lock ...