Cylinder head - inspection and renovation

1 Refer to Chapter 2, Part A, noting the following points:
a) Valve and valve seat cutting and regrinding can be carried out using conventional tools.

b) The cylinder head cannot be resurfaced, and if the surface distortion exceeds the specified limits, the cylinder head must be renewed.

    See also:

    Personalised settings
    You can change the settings of various functions through the information display. Unlocking the doors with the remote control You can set the unlocking function to unlock the driver side front do ...

    Service recommendations
    To help you service your vehicle, we provide scheduled maintenance information which makes tracking routine service easy. If your vehicle requires professional service, your authorized dealer can ...

    Alternator brushes - removal, inspection and refitting
    1 Remove the alternator. Bosch type 2 Remove the two securing screws and withdraw the regulator/brush box assembly from the rear of the alternator (see illustration). 7.2 Withdrawing the regul ...