Oil pump drive chain and sprockets - examination and renovation
1 Examine all the teeth on the sprockets. If the teeth are “hooked” in appearance, renew the sprockets.
2 Examine the chain tensioner for wear, and renew it if necessary.
3 Examine the chain for wear. If it has been in operation for a considerable time, or if when held horizontally (rollers vertical) it takes on a deeply-bowed appearance, renew it.
See also:
Air cleaner - removal and refitting
2.0 litre SOHC models
1 Disconnect the battery negative lead.
2 Depress the locking clip on the airflow
meter wiring plug and disconnect the plug.
Pull on the plug, not the wiring.
3 Loosen the s ...
Seat belt check (Every 6000 miles (10 000 km) or 6 months)
1 Periodically check the belts for fraying or
other damage. If evident, renew the belt.
2 If the belts become dirty, wipe them with a
damp cloth using a little detergent only.
3 Check the tightnes ...
Valve block (ABS) - removal and refitting
Caution: Refer to the
precautions in Section 1.
Removal
1 Disconnect the battery negative lead.
2 Depressurise the hydraulic system by
pumping the brake pedal at least 20 times, or
until it beco ...