Major operations possible with the engine in the vehicle

a) Removal of the cylinder head b) Removal of the camshaft c) Removal of the timing belt and sprockets d) Removal of the engine mountings e) Removal of the clutch and flywheel f) Removal of the crankshaft oil seals

    See also:

    USB port
    USB port See Connectivity. ...

    Throttle pedal - removal and refitting
    Removal 1 Disconnect the battery negative lead. 2 Remove the lower facia panel from the driver’s side. 3 Prise off the securing clip and disconnect the end of the throttle cable from the top of ...

    Crankshaft front oil seal - renewal
    Note: A suitable puller will be required to remove the crankshaft pulley. A new crankshaft pulley bolt, and a new lower timing chain cover gasket, must be used on refitting. 1 The crankshaft front ...