Radiator - removal and refitting

Removal
1 Disconnect the battery negative lead.

2 Drain the cooling system.

3 If not already done, disconnect the bottom hose from the radiator.

4 Disconnect the top hose and the expansion tank hose from the radiator.

5 On automatic transmission models, place a suitable container beneath the fluid cooler pipe connections at the radiator. Unscrew the union and plug the upper pipe, then repeat the procedure on the lower pipe.

6 Apply the handbrake, jack up the front of the vehicle and support on axle stands (see “Jacking and Vehicle Support”).

7 To improve access, remove the cooling fan shroud as follows, according to model.

8 On SOHC models, remove the four retaining clips and unscrew the two retaining screws, then withdraw the upper section of the fan shroud. Unclip and remove the lower section of the shroud.

9 On CVH and DOHC models, unclip the wiring connector from the fan motor(s) then unscrew the retaining nuts and washers, and withdraw the fan shroud(s) and cooling fan assembly(s) (see illustration).

5.9 Unscrew the fan shroud/radiator retaining nuts
5.9 Unscrew the fan shroud/radiator retaining nuts

10 On early models, unscrew and remove the upper radiator mounting nuts and washers (see illustration).

5.10a Radiator and cooling fan shroud upper mountings
5.10a Radiator and cooling fan shroud upper mountings

A Radiator mounting nut B Shroud securing screw
C Shroud securing clips
D Radiator top hose clip

Unscrew and remove the lower mounting bolts and washers and withdraw the radiator from under the vehicle (see illustration).

5.10b Lower radiator mounting bolt
5.10b Lower radiator mounting bolt

11 On all later models, the radiator is secured to the engine compartment front panel using clips and locking pegs. To release the top of the radiator, work through the cut-outs in the engine compartment front panel and remove the two radiator upper locking pegs (see illustration).

5.11Removing a radiator upper locking peg
5.11Removing a radiator upper locking peg

Working under the front of the vehicle, remove the two radiator lower mounting bolts. Support the radiator from underneath. Squeeze the upper radiator locking pegs to release them from the engine compartment front panel and lower the radiator assembly from the vehicle.

Refitting
12 Refitting is a reversal of removal, bearing in mind the following points.

13 Refill the cooling system.

14 On automatic transmission models, check and if necessary top-up the transmission fluid level.

    See also:

    Towing the vehicle on four wheels
    All vehicles WARNINGS: Switch the ignition on when your vehicle is being towed. The steering lock will engage and the direction indicators and brake lamps will not work if you do not. The brake ...

    Diagram 4a: 1984-86 KE-Jetronic fuel injection
    Diagram 4a: 1984-86 KE-Jetronic fuel injection For starting and charging circuits see Diagram 1 ...

    Ford Fiesta 2011 Review
    Ford says the Fiesta is Europe's best-selling car so far this year, but there hasn't been a U.S. model that has carried that name since 1980. What's more, America is not Europe, and de ...