Vacuum valves, ported vacuum switches and fuel traps - removal and refitting

Refer to Chapter 5, Section 22 (see illustration).

28.1 Low vacuum enrichment ported vacuum switch location in inlet manifold -
28.1 Low vacuum enrichment ported vacuum switch location in inlet manifold - model with Weber 2V carburettor

    See also:

    Thermostat - removal, testing and refitting
    OHV engines Note: A new gasket must be used on refitting. Removal 1 Drain the cooling system as described in Chapter 1. 2 Slacken the clips and disconnect the hoses at the thermostat housing (se ...

    Throttle pedal - removal and refitting
    Refer to Chapter 4 Part A, Section 11. ...

    Information messages
    Press the SET/RESET button to acknowledge and remove some messages from the information display. Other messages will be removed automatically after a short time. Certain messages need to be c ...