Mixture adjustment potentiometer (2.0 litre DOHC) - removal and refitting
1 The potentiometer is located at the rear right-hand side of the engine compartment, behind the MAP sensor.
2 Disconnect the battery negative lead.
3 Remove the screw, then withdraw the potentiometer and disconnect the wiring plug.
4 Refitting is a reversal of removal.
See also:
Bonnet lock release cable - removal and refitting
Removal
1 Working inside the vehicle, remove the
three retaining screws, and withdraw the
lower steering column shroud.
2 Remove the retaining screw, and withdraw
the release cable bracket from t ...
Idle speed and mixture - adjustment
Refer to Chapter 1, Sections 15 and 16. ...
Overhead console - removal and refitting
Removal
1 Disconnect the battery negative lead.
2 Open the sunroof.
3 On models with a manually-operated
sunroof, remove the sunroof handle securing
screw, then withdraw the handle and trim plate ...