Pulse-air control solenoid (1.6 litre CVH) - removal and refitting

1 The solenoid is located at the right-hand side of the engine compartment.

2 Disconnect the battery negative lead.

3 Disconnect the vacuum pipe connector from the pulse-air control solenoid (see illustration).

23.3 Disconnect the vacuum pipe connector from the solenoid
23.3 Disconnect the vacuum pipe connector from the solenoid

4 Disconnect the solenoid wiring plug, pulling on the plug, not the wiring.

5 Unscrew the securing screw, and withdraw the solenoid from the body panel.

6 Refitting is a reversal of removal, ensuring that the locating lug is correctly positioned, and noting that the vacuum pipes will only fit in one position.

    See also:

    Lexus SUV Manuals
    In early 1989, the company unveiled its first two models (which would debut for the 1990 model year) -- the entry-level ES 250 sedan and the flagship LS 400 sedan. The LS 400 was lauded by both j ...

    Floor mats
    WARNING: When using the floor mats, always make sure the floor mat is properly secured using the appropriate fixings and positioned so that it does not interfere with the operation of the pedals. ...

    Diagram 1. Starting, charging automatic transmission and warning lamps. Models from 1990 onwards
    Diagram 1. Starting, charging automatic transmission and warning lamps. Models from 1990 onwards ...