Load carrying

See also:

Front anti-roll bar - removal and refitting
Removal 1 The anti-roll bar is used in conjunction with the forged type suspension lower arm. 2 Jack up the front of the car and support it on stands (see “Jacking and Vehicle Support”). 3 Where ...

Valve block (ABS) - removal and refitting
Caution: Refer to the precautions in Section 1. Removal 1 Disconnect the battery negative lead. 2 Depressurise the hydraulic system by pumping the brake pedal at least 20 times, or until it beco ...

Distributor (OHC models) - removal and refitting
Note: During production the engine ignition timing is accurately set using a microwave process, and sealant is applied to the distributor clamp bolt. Removal of the distributor should be avoided e ...