Door check arm - removal and refitting

Removal
1 Remove the door inner trim panel.

2 Unscrew and remove the bolt securing the check arm to the body pillar.

3 Unscrew and remove the two bolts securing the check arm to the door, and withdraw the check arm from inside the door.

Peel back the waterproof plastic sheet where necessary for improved access.

Refitting
4 Refitting is a reversal of removal.

    See also:

    Head restraints
    Adjusting the head restraint WARNING: Raise rear head restraint when the rear seat is occupied by a passenger or a child restraint. Adjust the head restraint so that the top of it is level w ...

    Rear suspension angles - general
    The rear wheel toe and camber angles are set in production and do not require checking under normal service conditions. Of the two, only the toe setting can be adjusted, the camber angle being fix ...

    Courtesy lamp and luggage compartment lamp - renewal
    1 Disconnect the battery negative lead. 2 To remove a lamp, simply prise it from its location, using a thin-bladed screwdriver, and disconnect the wiring (see illustrations). 25.2a Removing a co ...