Direction indicator and hazard warning flasher switch assembly - renewal

1 Disconnect the battery negative lead.

2 Remove the securing screws and unclip the lower and upper steering column shrouds.

3 Remove the two securing screws and disconnect the two wiring plugs, then withdraw the switch from the steering column.

4 Refitting is a reversal of removal.

    See also:

    Performance
    Escort provides economical transportation in a conventional small-car package. Because Focus is the center of attention, bigger discounts should be available on the Escort. ...

    Rear suspension angles - general
    The rear wheel toe and camber angles are set in production and do not require checking under normal service conditions. Of the two, only the toe setting can be adjusted, the camber angle being fix ...

    Disabling the passenger airbag
    WARNING: Make sure that the passenger airbag is disabled when using a rearward facing child restraint on the front passenger seat. Fitting the passenger airbag deactivation switch WARNING: I ...