Clock - removal and refitting

1 Disconnect the battery negative lead.

Standard clock
2 Using a thin-bladed screwdriver, carefully prise the clock from the facia panel.

3 Disconnect the wiring plug and withdraw the clock.

4 Refitting is a reversal of removal.

Multi-function digital/analogue clock
5 Remove the single screw from the top edge of the facia panel in which the clock is housed, then withdraw the facia panel.

6 Remove the four now exposed securing screws, disconnect the wiring plug, and withdraw the clock (see illustration).

19.6 Multi-function digital/analogue clock securing screws (arrowed)
19.6 Multi-function digital/analogue clock securing screws (arrowed)

7 Refitting is a reversal of removal.

    See also:

    Engine/automatic transmission assembly - reconnection and refitting
    1 Reverse the removal procedure described in Section 12, noting the following points. 2 Check that the engine adapter plate is correctly positioned on its locating dowels. 3 As the torque converte ...

    Heated windows and mirrors
    Heated windows Use the heated windows to defrost or demist the windscreen or rear window. Note: The heated windows operate only when the engine is running. Heated windscreen Heated rear wind ...

    Sun blinds
    Pull the blind up and attach it to the hooks (A). Side windows Rear window ...