Fuel cut-off switch

Vehicles with a Duratec engine

Left-hand drive
Left-hand drive

Right-hand drive
Right-hand drive

The fuel supply may be cut off as a result of an accident or sudden vibrations (e.g.

collision when parking).

The switch is located behind the glove box. Open the glove box and empty the contents. Press the sides inwards and swivel the glove box downwards.

Resetting the switch

WARNING:
Do not reset the fuel cut-off switch if you see or smell leaking fuel.

1. Turn the ignition switch to position 0.

2. Check fuel system for leaks.

3. If no fuel leak is apparent, reset the switch by pushing in the button.

4. Turn the ignition switch to position II.

After a few seconds return the key to position I.

5. Make a further check for leaks in the fuel system.

    See also:

    Fuel pump - removal and refitting
    The fuel pump is integral with the fuel level sender unit in the fuel tank. Removal and refitting are as described in Part C of this Chapter for models with the CFI system. ...

    Driveshaft check (Every 12 000 miles or 12 months)
    1 Carry out a thorough inspection of the driveshafts and joints as follows. 2 Jack up the front of the car and support it securely on axle stands (see “Jacking and Vehicle Support”). 3 Slowly rot ...

    Idle Speed Control Valve (ISCV) - removal, cleaning and refitting
    Removal 1 Disconnect the battery negative lead. 2 Disconnect the valve wiring plug (see illustration). 12.2 Idle speed control valve - 1.6 EFI engine A Wiring plug B Securing bolts 3 Unscrew t ...