Global opening and closing

You can also operate the electric windows with the ignition off via the global opening and global closing function.

Note: Global closing will only operate if you have set the memory correctly for each window. See Electric windows.

Global opening
Global opening

To open all the windows, press and hold the unlock button for at least three seconds. Press either the lock or the unlock button again to stop the opening function.

Global closing

Vehicles without keyless entry

WARNING:
Take care when using global closing. In an emergency, press a button immediately to stop.

To close all the windows, press and hold


To close all the windows, press and hold the lock button for at least three seconds. Press any button again to stop the closing function. The anti-trap function is also active during global closing.

Vehicles with keyless entry
Vehicles with keyless entry

WARNING:
Take care when using global closing. In an emergency, press the button on the drivers door handle to stop.

Note: Global closing can be activated using the button on the drivers door handle. Global opening and closing can also be activated using the buttons on the passive key.

To close all the windows, press and hold the button on the drivers door handle for at least two seconds. The anti-trap function is also active during global closing.

    See also:

    Principle of operation
    Outside air Keep the air intakes forward of the windscreen free from obstruction (snow, leaves etc.) to allow the climate control system to function effectively. Recirculated air CAUTION: Pro ...

    Telephone controls
    Remote control Voice and mode button Incoming calls can be accepted by pressing the MODE button once. Press the button again to end the call. ...

    Principle of operation
    CAUTION: Using the system with the engine off will drain the battery. Voice recognition enables operation of the system without the need to divert your attention from the road ahead in order to ...