Toll reader

Toll reader
Toll reader

On vehicles with an anti-heat windscreen, toll readers should be placed in the area as shown (all measurements shown in millimetres), otherwise communication performance with toll stations may be reduced.

The toll reader should be placed on the passenger side to prevent the reader from obscuring the driver’s vision (e.g. at traffic lights).

    See also:

    Hydraulic unit pressure switch (ABS) - removal and refitting
    Note: To remove the pressure switch from the hydraulic unit in situ, Ford tool No 12-008 or a locally made equivalent will be required. The switch may be removed without special tools after removi ...

    Cleaning the interior
    Seat belts WARNINGS: Do not use abrasives, or chemical solvents to clean them. Do not allow moisture to penetrate the seat belt retractor mechanism. Clean the seat belts with interior cleaner ...

    Towing a trailer
    WARNINGS: Do not exceed 100 km/h (62 mph). The rear tyre pressures must be increased by 0.2 bar (3 psi) above specification. See Technical specifications. Do not exceed the maximum gross train ...