Ignition switch

WARNING:
Never return the key to position 0 or I when the vehicle is in motion.

0 The ignition is off.


0 The ignition is off.

I The ignition and all main electrical circuits are disabled.

Note: Do not leave the ignition key in this position for too long to avoid discharging the battery.

II The ignition is switched on. All electrical circuits are operational. Warning lamps and indicators illuminate. This is the key position when driving. You must also select it when being towed.

III The starter motor is activated. Release the key as soon as the engine starts.

    See also:

    Crankshaft rear oil seal - renewal
    Note: New flywheel/driveplate bolts must be used on refitting. 1 Remove the flywheel/driveplate and the engine adapter plate. 2 Extract the seal using an oil seal removal tool if available. It ma ...

    Bulb specification chart
    ...

    Principle of operation
    Electronic stability programme (ESP) WARNING: ESP does not relieve you of your responsibility to drive with due care and attention. without ESP A with ESP B The ESP supports stability when t ...