General information

WARNINGS:
Use load securing straps to an approved standard, e.g. DIN.

Make sure that you secure all loose items properly.

Place luggage and other loads as low and as far forward as possible within the luggage or loadspace.

Do not drive with the tailgate or rear door open. Exhaust fumes may enter the vehicle.

Do not exceed the maximum front and rear axle loads for your vehicle.

See Vehicle identification.

Heavy loads, when placed in the passenger compartment, should be on folded rear seats as shown. See Rear seats.

CAUTIONS:
Do not allow items to contact the rear windows.

Do not use any abrasive materials to clean the interior of the rear windows.

Do not install stickers or labels to the interior of the rear windows.

Luggage covers


    See also:

    Engine - reassembly
    Note: Ensure that all necessary new oil seals and gaskets have been obtained before starting the reassembly procedure. 1 With everything clean and parts renewed where necessary, commence reassembl ...

    General Repair Procedures
    Whenever servicing, repair or overhaul work is carried out on the car or its components, it is necessary to observe the following procedures and instructions. This will assist in carrying out the ...

    Bonnet - removal and refitting
    Removal 1 Support the bonnet in its open position, and place protective covers (old rags or cardboard) beneath the corners of the bonnet, and over the front wings to prevent damage to the paintwo ...