Brake and clutch fluid check

WARNINGS:
Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your doctor.

If the level is at the MIN mark, have the system checked by a properly trained technician as soon as possible.

Note: The brake and the clutch systems are supplied from the same reservoir.

Top up with fluid that meets the Ford specification. See Technical specifications.

    See also:

    Carburettor (Weber 2V type) - fast idle speed adjustment
    1 This procedure does not apply to models fitted with a carburettor stepper motor, for which no adjustment is possible. 2 Check the idle speed and mixture. The idle speed must be correct before at ...

    Accelerator pedal - removal and refitting
    The procedure is the same as described in Part A of this Chapter for carburettor models. ...

    General information
    WARNINGS: Use load securing straps to an approved standard, e.g. DIN. Make sure that you secure all loose items properly. Place luggage and other loads as low and as far forward as possible wit ...