Telephone setup

Phonebook

Note: It may be necessary to confirm phonebook access to the Bluetooth system via the mobile phone.

After start up access to the phonebook list can be delayed for several minutes, depending upon the size.

Phonebook categories

Depending on your phonebook entry, different categories can be displayed in the audio unit.

For example:

Note: Entries may be displayed without


Note: Entries may be displayed without a category attachment.

The category can also be indicated as an icon:

Phone
Phone

Mobile
Mobile

Home
Home

Office
Office

Fax
Fax

Making a phone an active phone

When using the system for the first time, no phone is connected to the system.

After switching on the ignition and the audio unit, the Bluetooth phone must be bonded to the system.

Bluetooth phone

After bonding a Bluetooth phone to the system, this becomes the active phone.

For further information refer to the phone menu.

Select the phone from the active phone menu.

Turning the ignition and radio or navigation unit back on again, the last active phone is picked up by the system.

Note: In some cases the Bluetooth connection must also be confirmed on the phone.

Bond another Bluetooth phone

Bond a new Bluetooth phone as described in the requirements for a Bluetooth connection.

Phones stored in the system are accessible by using the phone list on the audio unit.

Note: A maximum of six devices may be bonded. If six Bluetooth devices have already been bonded, one of these has to be debonded in order to bond a new device.

    See also:

    Central Fuel Injection (CFI) unit - removal and refitting
    Note: Refer to the precautions at the end of Section 1 before proceeding. Removal 1 Disconnect the battery negative lead. 2 Remove the air cleaner assembly. 3 Depressurise the fuel system as desc ...

    Cigar lighter - removal and refitting
    Removal 1 Disconnect the battery negative terminal. 2 On pre-1986 models remove the ashtray then undo the screws and withdraw the ashtray housing. On 1986 models onwards, refer to Section 21 and ...

    Crankshaft front oil seal - renewal
    1 Disconnect the battery negative lead. 2 Slacken the alternator mounting and adjuster bolts and after pushing the alternator in towards the engine, slip off the drivebelt. 3 Unscrew and remove th ...