Type approvals

Remote control

Type 1
Type 1

If the type approval of your remote control is inspected, refer to the table below. It is recommended that you use the remote control only in the countries listed.


Type 2
Type 2

If the type approval of your remote control is inspected, refer to the table below. It is recommended that you use the remote control only in the countries listed.

Passive key


Passive key

If the type approval of your passive key is inspected, refer to the table below. It is recommended that you use the passive key only in the countries listed.

Engine immobiliser


Engine immobiliser

If the type approval of your engine immobilisation system is inspected, refer to the table below.


Alarm


Alarm

If the type approval of your anti-theft alarm system is inspected, refer to the list of official test numbers below.

TYPE APPROVALS


TYPE APPROVALS

FCC/INDUSTRY CANADA NOTICE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID: WJLRX-42

IC: 7847A-RX42

Changes or modifications to your device not expressly approved by the party responsible for compliance can void the user's authority to operate the equipment.

RX-42 - declaration of conformity

We, the party responsible for compliance, declare under our sole responsibility that the Handset Integration product RX-42 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found at:

www.novero.com/declaration_of_conformity

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Ford Motor Company is under license. Other trademarks and trade names are those of their respective owners.

TYPE APPROVALS

iPod is a trademark of Apple Inc.

TYPE APPROVALS

© 2008 NAVTEQ B.V. All rights reserved.


© 2008 NAVTEQ B.V. All rights reserved.

Electromagnetic compatibility


    See also:

    Instrument panel components - removal and refitting
    Panel illumination and warning lamp bulbs Removal 1 Remove the instrument panel as described in Section 9. 2 Turn the bulbholders anti-clockwise and remove them from the rear of the instrument ...

    Tire pressure monitoring system (TPMS)
    Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inf ...

    Seat belt height adjustment
    Seat belt height adjustment Note: Lifting the slider slightly while pressing the locking button makes it easier to release the locking mechanism. To raise or lower, press the locking button on ...