Booster cushions

WARNINGS:
Do not install a booster seat or a booster cushion with only the lap strap of the seat belt.

Do not install a booster seat or a booster cushion with a seat belt that is slack or twisted.

Do not put the seat belt under your childs arm or behind its back.

Do not use pillows, books or towels to boost your childs height.

Make sure that your children sit in an upright position.

Secure children that weigh more than 15 kilogrammes but are less than 150 centimetres tall in a booster seat or a booster cushion.

Booster seat
Booster seat

We recommend that you use a booster seat that combines a cushion with a backrest instead of a booster cushion only. The raised seating position will allow you to position the shoulder strap of the adult seat belt over the centre of your childs shoulder and the lap strap tightly across its hips.

Booster cushion
Booster cushion

Integrated booster cushion

WARNINGS:
Do not use the raised integrated booster cushion together with a child safety seat.

The integrated booster cushion can be used for children that weigh between 22 and 36 kilogrammes (49 and 79 pounds).

CAUTION:
Remove the rear seat head restraint unless the child's head exceeds the top of the backrest. See Head restraints.

Unlocking
Unlocking

Note: Make sure that the locking mechanism is fully engaged.

The raised seating position will allow you


The raised seating position will allow you to position the shoulder strap of the adult seat belt over the centre of your childs shoulder and the lap strap tightly across its hips.

Locking

Note: Make sure that there are no obstructions in the linkage area before locking the integrated booster cushion.

Note: Make sure that the locking


Note: Make sure that the locking mechanism is fully engaged.

Child seat positioning


    See also:

    Internal connection details, all models
    Internal connection details, all models ...

    Temperature gauge sender unit - removal and refitting
    Note: Suitable jointing compound will be required on refitting. Removal 1 With the engine cold unscrew the pressure cap on the thermostat housing or expansion tank as applicable, then refit it. T ...

    Front seat air cushion assembly - removal and refitting
    Complete assembly - removal and refitting 1 Remove the seat. 2 Straighten the seat back cover retaining tangs, and pull the cover upwards to expose the air cushion. 3 Cut through the four securi ...