Switching off the engine

Vehicles with a turbocharger

CAUTION:
Do not switch the engine off when it is running at high speed. If you do, the turbocharger will continue running after the engine oil pressure has dropped to zero. This will lead to premature turbocharger bearing wear.

Release the accelerator pedal. Wait until the engine has reached idle speed and then switch it off.

    See also:

    Crankshaft and bearings - examination and renovation
    1 Proceed as described in Chapter 2, Part A, noting the following. 2 Production bearing undersizes are indicated as follows: Yellow or red paint marks on crankshaft - standard-diameter main beari ...

    Fuel quality - Petrol
    Note: We recommend that you use only high quality fuel without additives or other engine treatments. CAUTION: Do not use leaded petrol or petrol with additives containing other metallic compound ...

    Washer nozzles - removal and refitting
    Windscreen and rear window washers 1 To remove a nozzle, carefully prise it from its location using a thin-bladed screwdriver. Disconnect the washer hose and withdraw the nozzle. 2 To refit, rec ...