Stability control

See also:

Flywheel/driveplate - removal, inspection and refitting
Note: The manufacturers recommend that the flywheel/driveplate securing bolts are renewed after slackening. Suitable thread-locking agent will be required to coat the bolt threads. Removal 1 If t ...

Cylinder head and pistons - decarbonising
1 With the cylinder head removed as described in Section 7, the carbon deposits should be removed from the combustion surfaces using a blunt scraper. Take great care as the head is of light alloy ...

Fuel pressure regulator - removal and refitting
Note: Refer to the precautions at the end of Section 1 before proceeding. A new sealing ring will be required on refitting. Removal 1 Disconnect the battery negative lead. 2 Depressurise the fuel ...