General information

CAUTIONS:
Use only approved wheel and tyre sizes. Using other sizes could damage the vehicle and will make the National Type Approval invalid.

If you change the diameter of the tyres from that fitted at the factory, the speedometer may not display the correct speed. Take the vehicle to your dealer to have the engine management system reprogrammed.

A decal with tyre pressure data is located in the driver’s door opening at the B-pillar.

Check and set the tyre pressure at the ambient temperature in which you are intending to drive the vehicle and when the tyres are cold.

    See also:

    Hinge and lock check and lubrication (Every 12 000 miles (20 000 km) or 12 months)
    1 Work around the vehicle, and lubricate the bonnet, door and tailgate hinges with a light machine oil. 2 Lightly lubricate the bonnet release mechanism and exposed sections of inner cable with a ...

    Glasses holder
    Glasses holder ...

    Engine/automatic transmission assembly - reconnection and refitting
    1 Reverse the procedure described in Section 11, noting the following points. 2 Check that the engine adapter plate is correctly positioned on its locating dowels. 3 As the torque converter is onl ...