Removing a headlamp

WARNING:
Have Xenon bulbs changed by a trained technician. There is a risk of electric shock.

1. Open the bonnet. See Opening and closing the bonnet.

2. Remove the screw.


2. Remove the screw.

3. Using a suitable implement, remove the trim panel.

4. Release the retaining clips.


4. Release the retaining clips.

5. Disconnect the electrical connector.


5. Disconnect the electrical connector.

6. Disconnect the headlamp washer hose.

7. Remove the headlamp.

Note: When fitting the headlamp, make sure that you fully engage the headlamp in the retaining clips.

    See also:

    Instrument panel components - removal and refitting
    Panel illumination and warning lamp bulbs Removal 1 Remove the instrument panel as described in Section 9. 2 Turn the bulbholders anti-clockwise and remove them from the rear of the instrument ...

    Accelerator pedal - removal and refitting
    The procedure is the same as described in Part A of this Chapter for carburettor models. ...

    Crankshaft rear oil seal - renewal
    1 Remove the flywheel/driveplate and the engine adapter plate. 2 Extract the oil seal using an oil seal removal tool if available. It may also be possible to remove the oil seal by drilling the ou ...