General information

WARNINGS:
Use load securing straps to an approved standard, e.g. DIN.

Make sure that you secure all loose items properly.

Place luggage and other loads as low and as far forward as possible within the luggage or loadspace.

Do not drive with the tailgate or rear door open. Exhaust fumes may enter the vehicle.

Do not exceed the maximum front and rear axle loads for your vehicle.

See Vehicle identification.

Heavy loads, when placed in the passenger compartment, should be on folded rear seats as shown. See Rear seats.

CAUTIONS:
Do not allow items to contact the rear windows.

Do not use any abrasive materials to clean the interior of the rear windows.

Do not install stickers or labels to the interior of the rear windows.

Luggage anchor points


    See also:

    Adjusting the windscreen washer jets
    1. Open the bonnet. See Opening and closing the bonnet. 2. Using a suitable implement adjust the jets. 3. Close the bonnet and check the operation of the jets. See Opening and closing the bonn ...

    Headlamp control
    Rotate the headlamp control to the first position to turn on the parking lamps. Rotate to the second position to turn on the headlamps. Rotate back to to turn the headlamps off. ...

    Pistons and connecting rods - removal and refitting
    1.8 litre (R2A type) Removal 1 With the engine removed from the vehicle, remove the sump and the cylinder head. 2 Check the big-end caps for identification marks and if necessary use a centre-pun ...