General information

CAUTIONS:
Use only approved wheel and tyre sizes. Using other sizes could damage the vehicle and will make the National Type Approval invalid.

If you change the diameter of the tyres from that fitted at the factory, the speedometer may not display the correct speed. Take the vehicle to your dealer to have the engine management system reprogrammed.

A decal with tyre pressure data is located in the driver’s door opening at the B-pillar.

Check and set the tyre pressure at the ambient temperature in which you are intending to drive the vehicle and when the tyres are cold.

    See also:

    Cab interior trim panels (P100 models) - removal and refitting
    Side trim panel 1 Remove the rear pillar trim panel. 2 Remove the side trim panel by prising out the four expander pins from the clips, then pulling out the clips and withdrawing the panel. 3 Re ...

    Security code
    Each unit incorporates a unique code that is linked to the vehicle identification number (VIN). The system will automatically check that the audio unit and vehicle match before allowing operation ...

    Oil pump drive chain and sprockets - examination and renovation
    1 Examine all the teeth on the sprockets. If the teeth are “hooked” in appearance, renew the sprockets. 2 Examine the chain tensioner for wear, and renew it if necessary. 3 Examine the chain for ...