Check MyKey System Status

The vehicleТs message center system check will provide the status of the following MyKey parameters:

Х MYKEY MILES Ч This odometer only tracks mileage when a MyKey is used. If mileage does not accumulate as expected, then the MyKey is not being used by the intended user. The only way to reset this odometer to zero is by clearing MyKey . If this odometer is lower than the last time you checked, then the MyKey system has been recently cleared.

Х # MYKEY(S) PROGRAMMED Ч Indicates how many MyKeys are programmed to the vehicle. Can be used to detect deletion of a MyKey .

Х # ADMIN KEYS PROGRAMMED Ч Indicates how many Admin keys are programmed to the vehicle. Can be used to detect if an additional spare key has been programmed to the vehicle

Refer to Message center in the Instrument Cluster chapter for MyKey system warnings displays.

    See also:

    Cooling fan switch - removal and refitting
    On CVH models, the cooling fan switch is located on the right-hand side of the thermostat housing (see illustration). On DOHC models, the switch is located in the end of the thermostat housing. R ...

    Technical specifications
    Vehicle fluids * You can use an alternative SAE 5W-30 engine oil, providing it meets the specification defined by WSS-M2C913-B. Note: If you operate your vehicle in temperatures below -20∞C (-4 ...

    Principle of operation
    WARNING: When you are going downhill, your speed may increase above the set speed. The system will not apply the brakes but a warning will be given. The system allows you to set a speed, to whic ...