Folding down second row seats

1. Remove the second row head restraint. See Second row adjustable head restraints in this chapter.

Note: Place the head restraint underneath the back of the front seat for storage.

2. Pull the seat release strap.

Note: Make sure the floor is clear of all objects before folding the seat.


Note: Make sure the floor is clear of all objects before folding the seat.

3. Flip seat forward.

Attach the safety belt web snap


Attach the safety belt web snap button to the quarter trim panel snap button. This will ensure that safety belt does not get caught by staying out of the seat back folding path.

4. To release seatback, pull the


4. To release seatback, pull the seatback release lever (on top of seat) toward the front seat. This is common for both 60% and 40% seatbacks.

Note: When the seatback release lever is pulled, slowly lower seatback to the flat position.

5. Rotate seatback down into load


5. Rotate seatback down into load floor position.

Returning the second row seats to upright position


    See also:

    Climate control commands
    Climate The climate voice commands supports the functionality of the fan speed, temperature and mode settings. Not all functions are available on all vehicles. Overview The overview below shows ...

    Keyless entry
    General information WARNING: The keyless entry system may not function if the key is close to metal objects or electronic devices such as mobile phones. The passive entry system will not functio ...

    Electronic compass (if equipped)
    The compass heading is displayed in the center stack display. The compass reading may be affected when you drive near large buildings, bridges, power lines and powerful broadcast antenna. Magnetic ...