Driving through water

If driving through deep or standing water is unavoidable, proceed very slowly. Never drive through water that is higher than the bottom of the wheel rims (for cars) or the bottom of the hubs (for trucks).

When driving through water, traction or brake capability may be limited.


When driving through water, traction or brake capability may be limited.

Also, water may enter your engine’s air intake and severely damage your engine or your vehicle may stall. Driving through deep water where the transmission vent tube is submerged may allow water into the transmission and cause internal transmission damage.

Once through the water, always dry the brakes by moving your vehicle slowly while applying light pressure on the brake pedal.

Wet brakes do not stop the vehicle as quickly as dry brakes.

    See also:

    Loudspeakers - removal and refitting
    1 Disconnect the battery earth lead. Facia panel-mounted speakers Upper 2 Prise the speaker grille from its four retaining clips in the facia using a thin-bladed screwdriver. 3 Remove the four s ...

    Mitsubishi car's information
    When first introduced, the Mitsubishi Endeavor earned a surprise win in an Edmunds comparison test of midsize SUVs. It won with a combination of good looks, torque-filled engine performance, smart han ...

    Fuel pump - cleaning
    Note: Refer to the warning at the end of Section 1 before proceeding. 1 On certain early models the fuel pump has a detachable cover allowing access to the internal filter for cleaning. If this ty ...