Removing the jumper cables

Remove the jumper cables in the reverse order that they were connected.

Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery.

1. Remove the jumper cable from the ground metal surface.

2. Remove the jumper cable on the negative (-) terminal of the booster vehicles battery.

3. Remove the jumper cable from the positive (+) terminal of the booster vehicles battery.

4. Remove the jumper cable from the positive (+) terminal of the disabled vehicles battery.

Wrecker towing


    See also:

    Electrical fault finding - general information
    Refer to Chapter 12. ...

    Mud and water
    If you must drive through high water, drive slowly. Traction or brake capability may be limited. When driving through water, determine the depth; avoid water higher than the bottom of the hubs ...

    Engine oil dipstick - 2.0L Duratorq-TDCi (DW) Diesel
    MIN A MAX B ...