Interior

For fabric, carpets, cloth seats, safety belts and seats equipped with side airbags:

Remove dust and loose dirt with a vacuum cleaner.

Remove light stains and soil with Motorcraft Professional Strength Carpet & Upholstery Cleaner (ZC-54).

If grease or tar is present on the material, spot-clean the area first with Motorcraft Spot and Stain Remover (ZC-14). In Canada, use Motorcraft Multi-Purpose Cleaner (CXC-101).

If a ring forms on the fabric after spot cleaning, clean the entire area immediately (but do not oversaturate) or the ring will set.

Do not use household cleaning products or glass cleaners, which can stain and discolor the fabric and affect the flame retardant abilities of the seat materials.

vehicles safety belts, as these actions may weaken the belt webbing. WARNING: Do not use cleaning solvents, bleach or dye on the
vehicles safety belts, as these actions may weaken the belt webbing.

not use chemical solvents or strong detergents. Such products WARNING: On vehicles equipped with seat-mounted airbags, do
not use chemical solvents or strong detergents. Such products could contaminate the side-airbag system and affect performance of the side airbag in a collision.

    See also:

    Tailboard (P100 models) - removal and refitting
    Removal 1 Lower the tailboard to the open position. 2 Detach the rear lamp wiring cover on one side of the vehicle by removing the two securing screws (see illustration). 24.2 Rear lamp wiring ...

    First aid kit
    Space is provided in the luggage compartment. 3-door, 4-door and 5-door Estate ...

    Engine/manual gearbox assembly - removal and separation
    Note: A suitable hoist and lifting tackle will be required for this operation. 1.8 litre (R2A type) Removal 1 Proceed as described in Section 8, paragraphs 1 to 15 inclusive. 2 Working inside th ...