Fastening the seat belts

WARNING:
Insert the tongue into the buckle until you hear a distinct click. You have not fastened the seat belt properly if you do not hear a click.


Pull the belt out steadily. It may lock if you


Pull the belt out steadily. It may lock if you pull it sharply or if the vehicle is on a slope.

Press the red button on the buckle to release the belt. Let it retract completely and smoothly.

    See also:

    Cylinder head - inspection and renovation
    Refer to Section 23, Chapter 2, Part A but pay particular attention to the note at the beginning of the Section as all CVH engines are fitted with hardened valve seats. ...

    Fuses, relays and circuit breakers - general information
    Pre-1986 models 1 The fuses and most of the relays are located in a plastic box attached to the bulkhead on the driver’s side of the engine compartment. 2 The fuses are numbered to identify the ...

    Floor mats
    WARNING: When using the floor mats, always make sure the floor mat is properly secured using the appropriate fixings and positioned so that it does not interfere with the operation of the pedals. ...