General information

Note: The information display will remain on for several minutes after you switch off the ignition.

Various systems can be programmed using the audio unit controls.

Device list

The highlighted icon shows the current function in use.



Auxiliary input
Auxiliary input




Press the up and down arrow buttons

Press the up

and down

arrow buttons to scroll through and highlight the options within a menu.

Press the right

arrow button to enter a sub-menu.

Press the left

arrow button to exit a menu.

Hold the left

arrow button pressed at any time to return to the main menu display (escape button).

Press the OK

button to choose and confirm a setting.

Menu structure

Type 1

Type 2

Type 2

Note: Phone menu depends on phone capabilities and call status etc.

Use the MENU button and left arrow key to access the menus.

Trip computer

    See also:

    Telephone controls
    Remote control Voice and mode button Voice button 1 Mode button 2 Incoming calls can be accepted by pressing the MODE button once. Press the button again to end the call. ...

    Cylinder head and pistons - decarbonising
    OHV engines 1 With the cylinder head removed (Section 4), the carbon deposits should be removed from the combustion spaces using a scraper and a wire brush fitted into an electric drill. Take care ...

    Tyre repair kit
    Your vehicle may not have a spare tyre. In this case it will have an emergency tyre repair kit that can be used to repair one flat tyre. The tyre repair kit is located in the spare wheel well. G ...