Changing a fuse

WARNINGS:
Do not modify the electrical system of your vehicle in any way. Have repairs to the electrical system and the replacement of relays and high current fuses carried out by properly trained technicians.

Switch the ignition and all electrical equipment off before touching or attempting to change a fuse.

CAUTION:
Fit a replacement fuse with the same rating as the one you have removed.

Note: You can identify a blown fuse by a break in the filament.

Note: All fuses, except high current fuses, are a push fit.

    See also:

    Sunroof - removal, refitting and adjustment
    Glass panel - removal and refitting 1 Open the sunblind and remove the three screws and clips shown (see illustration) then slide the lower frame rearwards into the roof. 39.1 Sunroof lower fr ...

    Reversing lamp switch - renewal
    1 For automatic transmission models, refer to Chapter 7, Part B. For manual gearbox models, proceed as follows: 2 Disconnect the battery negative lead. 3 Apply the handbrake, jack up the front of ...

    General information and precautions
    Contact breaker ignition system The ignition system is divided into two circuits, low tension (primary) and high tension (secondary). The low tension circuit consists of the battery, ignition swit ...